FETCHED: 2026-08-15
SOURCE: https://guides.lib.purdue.edu/ld.php?content_id=84269180 (docx video transcript)
======================================================================


How to Create Simple Geometric Shaped Stickers Tutorial Video Transcript
00:00:00
Hi there and welcome to the Knowledge Lab sticker printing guide. Today we're going to be going over how to prep and submit a file for a simple rectangular or circular stickers like this. The file will need to be prepped in Adobe Illustrator and this video will also serve as an intro on how to use the software. Before we begin, we want to start off on the Knowledge Lab's website. Once at our landing page, we want to scroll down to the Roland Versa Studio BN20A sticker vinyl printer. And once you
00:00:27
click on this dropdown, you can click on the sticker printing guide and reservation page. Now, this page has a whole bunch of useful information on it, a handy file, and also the link to schedule a print time. And we'll come back to this later. We first want to click on prep your file in the left hand column. And in this page, we have all the file prep instructions written down. We actually want to skip forward to create your cut path and download this Roland VersaWorks.ai file. This is going to be
00:00:56
important later down on the road. Once you've downloaded that file, let's go ahead and open up Adobe Illustrator. This is going to be the landing page that you see when you first log into the program. The first step for us is to click on this new file button. It'll give us this menu with a whole bunch of different options on this right hand column. The ones that we want to pay attention to are width, height, and color mode. The width and height determine the size of your artboard. For
00:01:22
us, we're going to set that as 18x 12in. The width of our sticker rolls are 18 in wide and 12 in is a good reference measurement. For color mode, we want to set this to CMYK. The reason being is that the printer prints in CMYK, so we want to match our file to that color type. After that, we're just going to press create. Once we create our file, this is going to be the page that greets us. In the center, this big white rectangle is our artboard. On the left hand side is going to be all of our tools. And on the right
00:01:54
hand side is going to be our properties panel. The first step that we want to take is to take the images that we want to turn into stickers and put them down on our artboard. One way to do that is to go up to file down to place and to select the files that you want. Today we're going to be working with two. Once you have that selected, you can click and drag to put them down on our artboard. You can also copy and paste. And in terms of the file type, it can be a PNG, a PDF, SVG, any image file works.
00:02:26
The next thing I want to introduce you to is the selection tool. It's going to be our best friend. It's this black arrow with the keyboard shortcut V. It allows us to interact with our artboard and the things that are on it. For example, I can click and drag to move things around. These white boxes are anchor points. I can click and drag to scale things. I can also press shift in order to scale things proportionally, or I can rotate things. And also by holding shift, they go by 45°. And if I ever get lost or do something I
00:02:56
don't want to do, Control+Z always brings us back. Our goal now is to create an outline of the shape that I want my sticker to be. This is going to be called our cut path. And this cut path needs to be a very specific width and a very specific color in order to tell our sticker printer to cut along it. The two most common shapes for this cut path is going to be either a rectangle or a circle. And luckily, we can create both easily using the shape tools on the left hand side. Clicking on this rectangle icon gives me the
00:03:25
rectangle tool. And by clicking and dragging on the artboard, we're able to create any shape rectangle I want. And by holding shift, it can create a perfect square. Similarly, for the circle, the ellipse tool allows me to create any size ellipse I want. And if I hold shift, it allows me to create a perfect circle. Going back to my selection tool, some other quick things. Clicking and dragging over multiple objects will allow you to select them both. Additionally, you can use shift+click to select multiple objects as well. Now
00:03:54
that we have our shapes created, we do have one issue. The outlines currently cover up the image that we want printed out for our sticker. The reason for that is because our outline currently has a fill and this property is controlled by the fill and stroke tool in the bottom lefthand corner. Fill is the solid square and controls the color of the shape within the line. And stroke is the hollow square that controls the color of the line itself. You can select which one you want to work with by clicking on
00:04:21
either square and bringing them above the other. For a cut path, we do not want any fill. So, we can get rid of that by clicking on the shape we want to work with, clicking on the fill icon, and then clicking on the slash to turn the fill transparent. Once again, for the other shape, I'll select it. Double check that my fill tool is selected and click on the slash to get rid of my fill. I'll use my selection tool now to make sure that the shapes actually look good in relation to the images because I
00:04:48
can see them. Now, additionally, if I want to center my image, my shape, I can go ahead and select them both and then use my alignment tools that show up on my right hand column and then by clicking on the horizontal and vertical center, I can now know that my image is perfectly in the center of my outline. Now that we have our outlines, we need to turn it into the cut path by using that specific color and width that we talked about earlier. For the color, we're going to be using the file that we
00:05:15
downloaded at the beginning. While we can change the color of something in many different ways in Illustrator, we have to use this specific color file provided by the stickers manufacturer. In order to access the file, we're going to go up to window and then down to swatches. And then once I have the swatch panel open, I'll press on this library icon and then go down to other library. And then I'll open up the file that we downloaded. This will give me this window with some colors that I can
00:05:42
play with. The most important is this magenta that is labeled cut contour when I hover over it. Changing the color of a line to cut contour tells the sticker printer that the line is now a cut path. So let's go ahead and do that for our outlines. I'm first going to select my line, then click on the stroke tool by bringing the hollow square up to the front, and then I'll click on the swatch for cut contour. Clicking off of my line, I see that my line is now magenta, which is perfect. Let's do that one more
00:06:12
time for the second outline. Click on the line and then the swatch. The final thing to do with these outlines is to change it to the specific width. When I click on the line, I can use the stroke width tool on the right hand side. And then we'll change that value to 0.1. Doing it again for the other. Click on it and change it to 0.1. Now the cut path is prepped and all we have to do is to size our stickers properly. Selecting both our sticker and the outline, we can see in the transform panel on the right hand side that this
00:06:44
is currently about 6 in wide and 3 in tall. However, I want them a little smaller. So I can change that by changing these values. I'm also making sure that the chain link is selected, which will allow for proportional scaling. So, let's go ahead and make these 2 in tall. Once we have the scaled, our stickers are pretty much ready to go. The one thing left is to position them together and shrink the artboard to their outlines. The reason for this is because if we leave the artboard as is, there
00:07:17
will be a lot of white space printed out when we send it to our sticker printer. The way that we change our artboard size is through first selecting both of our stickers, going to window, artboard, and then selecting this icon right here. And then in the dialog box, we're going to click preset and then say fit to selected art. Now, our artboards are going to be perfectly sized. And one trick, I can press control+0 in order to make my artboard fill my screen so I can see my stickers as big as they can be.
00:07:51
This file is now ready to be sent to us and to get printed. We now have our sticker image. We have our cut path in our specific color in our specific width. And now I'm ready to submit it. One important thing to note is that if I wanted 50 copies of each stickers, I do not have to copy and paste this sticker 50 times. I only need one version of each and then the copy process can happen in the printer software later down the line. In order to submit this file, we need to save it as a high quality PDF. We can do
00:08:22
this by going to file, save as, and then in the save menu, selecting PDF, and then selecting high quality PDF in the presets on our popup here. After it's saved, we can go back to our website and then go to start here. And then we can click on the schedule a print link. And then this will take us to our scheduling form. Then we want to click next available and then select the amount of time you need. A good rule of thumb is that for every 12 in of length that you want to print out, reserve half an hour. Since I only
00:08:58
need one print, I can select one green square. And then clicking submit brings us to the form that we can fill out. The most important thing to remember is that when you submit, make sure to upload both your PDF and the original image files for the stickers. After that, press submit and you're all good to go. If you have any questions, feel free to email us or stop by during our operating hours.
